Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to backup wlc local user database

Hi,

We want to replace the old anchor, and we dont want to loose all users that are present in the old controller. How to move all users from old controller to new controller.

thanks,

ramesh

2 REPLIES

Re: How to backup wlc local user database

you could try to do the

config password clear-text enable

Then pull a show run.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

The accounts don't show up in

The accounts don't show up in an ordinary show run-config, but they DO show up in a show run-config commands log as long as you perform a config passwd-cleartext enable as already mentioned. You may also want to do a config paging disable first.

 

Tested under 7.4.110.0. We'll be using this method to transfer accounts into Cisco ACS.

1145
Views
0
Helpful
2
Replies
CreatePlease to create content