Re: How to check on which APs a wlan profile is activated on WLC
Don't know if you call it a summary, but if you run a show run-config or show running-config on the wlc cli, the ap information is in one of those. You then can paste that to notepad or word and do a find .
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...