04-10-2008 03:58 AM - edited 07-03-2021 03:41 PM
Hello,
we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).
Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?
Best Regards,
Thorsten
04-10-2008 04:31 AM
Don't know if you call it a summary, but if you run a show run-config or show running-config on the wlc cli, the ap information is in one of those. You then can paste that to notepad or word and do a find
04-10-2008 05:21 AM
Hello,
I tested it but did not get the output I am looking for.
What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:
wlan profile 1
ap1
ap2
ap3
wlan profile 2
ap2
ap5
ap7
...
Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?
Regards,
Thorsten
04-10-2008 07:34 AM
Try config paging enable | disable
04-10-2008 06:47 AM
If you have WCS, this can be done under the reporting function
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide