Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

How to check on which APs a wlan profile is activated on WLC4402

Hello,

we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).

Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?

Best Regards,

Thorsten

4 REPLIES
Hall of Fame Super Silver

Re: How to check on which APs a wlan profile is activated on WLC

Don't know if you call it a summary, but if you run a show run-config or show running-config on the wlc cli, the ap information is in one of those. You then can paste that to notepad or word and do a find .

-Scott
*** Please rate helpful posts ***
Community Member

Re: How to check on which APs a wlan profile is activated on WLC

Hello,

I tested it but did not get the output I am looking for.

What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:

wlan profile 1

ap1

ap2

ap3

wlan profile 2

ap2

ap5

ap7

...

Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?

Regards,

Thorsten

Hall of Fame Super Silver

Re: How to check on which APs a wlan profile is activated on WLC

Try config paging enable | disable

-Scott
*** Please rate helpful posts ***

Re: How to check on which APs a wlan profile is activated on WLC

If you have WCS, this can be done under the reporting function

201
Views
0
Helpful
4
Replies
CreatePlease to create content