Re: how to connect iPhone to WPA2 enabled enviroment where as us
Do you have a working wireless solution now using WPA2? The reason I ask is that if you have one working with AD, you are probably doing 802.1x. Something like PEAP MSCHAPv2. This also requires a radius server like Microsoft IAS or NPS. Just google WLC PEAP using IAS and you will find a lot of documents that might help.
Once you get that setup, you just manually setup the iPhone or WPA2 Enterprise and enter the AD login.
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...