Re: how to connect iPhone to WPA2 enabled enviroment where as us
Do you have a working wireless solution now using WPA2? The reason I ask is that if you have one working with AD, you are probably doing 802.1x. Something like PEAP MSCHAPv2. This also requires a radius server like Microsoft IAS or NPS. Just google WLC PEAP using IAS and you will find a lot of documents that might help.
Once you get that setup, you just manually setup the iPhone or WPA2 Enterprise and enter the AD login.
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...