Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

wkw
New Member

How to dynamicall assign a vlan to a user based on dot1x PEAP

Hi,

Just wondering if there's a method for assigning vlans depending on the dot1x authentication. Say for example, there are 2 groups of users, staff and student, who will be connecting to a wireless access point via dot1x (PEAP using Microsoft IAS Radius). I want to be able to, depending on whether the user connects as staff or student, to assign a vlan dynamically to that user, in order to control what he/she is authorised to do. Can anyone point me in the direction of how to go about doing this?

Much appreciated,

woon

2 REPLIES
Cisco Employee

Re: How to dynamicall assign a vlan to a user based on dot1x PEA

You need to configure RADIUS attributes [64], [65], and [81] in IAS.

This might help:

<http://www.cisco.com/application/pdf/en/us/guest/netsol/ns75/c685/ccmigration_09186a0080259047.pdf>

New Member

Re: How to dynamicall assign a vlan to a user based on dot1x PEA

Hi, have u done this dynamic vlan assignment on WLC before?

152
Views
0
Helpful
2
Replies