I am managing a large number of access points placed at hotspots (hotels) at remote sites. A large number of these are old 350 points , and i suspect that some of them are not working as they should. Some are not carrying any traffic at all, and in the statistics for the TX-Radio all counters are 0, but there are no alarms/traps from the APs.
I suspect that eiter the radio RX or TX is faulty.
I can access the APs via GUI and SNMP.
Does anybody have an idea how to identify which APs are faulty without actually visiting the site?
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...