How to identify used AP in RADIUS Accounting

[timovirt1]

We are using 5508 WLC with 3602 APs.

Looks like in RADIUS Authentication Called-Station-Id is the MAC address of the AP,

but in RADIUS Accounting Called-Station-Id is the MAC address of the WLC.

How can we change that behaviour so that Called-Station-Id will always be the MAC address of the AP?

Or is there some other way to identify the actual AP to which the user is connected?

Regards

Timo

[Scott Fella]

The WLC doesn't send the AP name in any attribute so that would not be possible. Autonomous AP's it's possible because you can specify the NAS-ID of the AP.

Sent from Cisco Technical Support iPhone App

[timovirt1]

Hmm, I did some trial and error and solved the problem.

On the WLC, go to Security > AAA > RADIUS > Authentication and set the Call Station ID Type to "AP MAC Address:SSID". Even tho that seems to be for RADIUS Authentication, it changes the Called-Station-Id also for RADIUS Accounting.

Thx anyway

Timo