Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

howto setup wpa2+aes+psk with mac-filter (radius) on WLC 4402

HI

   I am try to setting wpa2+aes+psk with mac-filter (radius) on WLC 4402 (6.0.182),  with Lap - 1142

   on security , set L2 security wpa+wpa2 and check MAC filtering

   uncheck WPA

   check WPA2, AES, unckeck TKIP

  Auth key mgmt PSK

   psk fromat ASCII

  L3   none

  uncheck web policy

AAA servers

  select radius server enable accounting server

   It's work fine , when I using WEP with mac-filter(radius)

  but when I select WPA2  it's fail and  no log  both on WLC and radius server

Is this limitation or bug....

Thanks in advance for your help

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: howto setup wpa2+aes+psk with mac-filter (radius) on WLC 440

That sounds like it should work.  Maybe your client doesnt like wpa2/aes or the PSK doesnt match.  I'd try to associate with that same config, but without the mac filtering enabled to try to narrow down the problem.

-John

2 REPLIES
Bronze

Re: howto setup wpa2+aes+psk with mac-filter (radius) on WLC 440

That sounds like it should work.  Maybe your client doesnt like wpa2/aes or the PSK doesnt match.  I'd try to associate with that same config, but without the mac filtering enabled to try to narrow down the problem.

-John

New Member

Re: howto setup wpa2+aes+psk with mac-filter (radius) on WLC 440

Ha.... It's Bug  CSCta53985

test on  6.0.196  work fine

Thank alot

1855
Views
0
Helpful
2
Replies