04-10-2014 02:16 AM - edited 07-05-2021 12:39 AM
dear team,
I am trying to configure HREAP option in CIsco 3850 switch and WLC 5508. I am not able to get the HREAP option in the advance TAB of the WLAN tab. Kindly let me know whether I can configure HREAP option in Cisco 3850 switch and Cisco WLC 5508.
Regards,
Jubair.S
04-10-2014 03:59 AM
Hi,
yes - you need to do the following:
Under wireless tab on the WLC, select the AP yu want to configure as H-REAP mode, then under the APs general tab. Choose AP Mode., and configure this to H-REAP mode.
Beware you will also need to modify the switch port that the AP is connected to must be changed to a trunkport, i.e. switchport mode trunk.
Here is a link for more detail.
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/71250-h-reap-design-deploy.html
HTH
Mike
04-10-2014 05:19 AM
04-10-2014 02:05 PM
Hi
3850/5760 (or Converged Access) does not support H-REAP or any other modes other than LOCAL mode AP deployment
See below for WLC feature comparison
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#~controllers
HTH
Rasika
*** Pls rate all useful responses ****
04-11-2014 04:32 AM
Hi Rasika,
What about Cisco 5508. I am using Cisco AP 1600 and 3600 for this HREAP use. Am I able to configure HREAP in Cisco 5508 along with Cisco AP 1602 and 3600 series.
04-11-2014 05:27 AM
This is a good design and deployment guide for H-reap in 5508 .
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81680-hreap-modes.html
04-11-2014 09:57 AM
Hi,
As per the Cisco documents, HREAP has been migrated as flex connect mode.
http://www.xerunetworks.com/2012/05/cisco-5508-wlc-configuration-lab-wpa2-guest-access-flexconnect-aka-hreap/comment-page-1/#comments
04-15-2014 11:07 AM
That all depends on the version of code that is running on the controller, I started off with HREAP on our 5508 because I was running a 7.0.x.x version once I moved to 7.4 HREAP was converted to flex connect...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: