I've configured a 2811 ISR with an HWIC-AP-G-A for LEAP w/ RADIUS authentication. I am searching for documentation for configuring PEAP but am having a hard time finding what I am looking for.
Could anyone point me in the right direction, and tell me if it is possible to accomplish all on the router? I made a root cert through IIS tools and am not quite sure how to go about uploading it and associating it with AAA/RADIUS. Thanks in advance.
As long as you are using an external Radius server all you need to do is make sure you have "authentication open eap..." under your SSID config. LEAP only uses the "authentication network-eap..." statement but PEAP and other EAP methods use the open statement.
If you are trying to use the local Radius server you will be limited to LEAP and EAP-FAST.
Ok. I was unaware that you could only use LEAP or EAPFAST on a local authenticator.
That being said.. Anyone have suggestions for documentation on EAPFAST? I used the Cisco default configuration which is printed in 2-3 manuals for it on a local authenticator and cannot get it to work. Word for word step by step.. I'm just trying to see what my options are on an ISR with everything built in and don't want to use an external server. Thanks in advance.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...