Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

I can ping it but not browse it AirLap 1242AG-E-K9

Hi to all i'm trying to config a new 1242AG but i'm not able to go in to the config page via browser.

I can ping the device but if i digit the same ip on the url i don't get the web interface of it.

If i'm connect a serial cable via hyperterminal i can see these message

*Dec 20 06:14:51.627: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.102.98, mask 255.255.255.0, hostname APacf2.c5ea.b218

Translating "CISCO-CAPWAP-CONTROLLER.carmens.it"...domain server (192.168.0.13)

Translating "CISCO-LWAPP-CONTROLLER.carmens.it"...domain server (192.168.0.13)

*Dec 20 06:14:59.502: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Dec 20 06:14:59.504: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.carmens.it

*Dec 20 06:14:59.506: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.carmens.it

Via IPSU i can't get any ip or sei it ....

what should i do ?

antone can help me ?

10x to all

Omar

Padua

Italy

13 REPLIES
Hall of Fame Super Silver

I can ping it but not browse it AirLap 1242AG-E-K9

You nave a lightweight image on the AP.  This requires a WLC in order for you to configure that.  If you want a stand alone AP, you need to upload an autonomous image to the AP.  Here is a list of ways to TFTP the image to the AP.  You will need to have a support contract in order to download software.

Using a TFTP Server to Return to a Previous Release

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

I can ping it but not browse it AirLap 1242AG-E-K9

Dear Scott i've bought 5 device like this one but only this gave me these problems ...

with others i've connected and set the ip via IPSU and then via browser i config them but with this one no way ...

how could it be ???

Thanks for your answer you are so glad

Omar

Hall of Fame Super Silver

I can ping it but not browse it AirLap 1242AG-E-K9

Well, they must of sent you the wrong one... this tells you that you have a lightweight access point... see the capwap

Translating "CISCO-CAPWAP-CONTROLLER.carmens.it"...domain server (192.168.0.13)

Translating "CISCO-LWAPP-CONTROLLER.carmens.it"...domain server (192.168.0.13)

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

I can ping it but not browse it AirLap 1242AG-E-K9

So at the end i'm reciving a wrong one ?

strange .. seems like the others

Ok i will contact my seller and i wil lask to chenge it

thank's

Omar

Hall of Fame Super Gold

I can ping it but not browse it AirLap 1242AG-E-K9

Ok i will contact my seller and i wil lask to chenge it

You can change it yourself (I doubt if your reseller knows how to do it).  Contact the reseller and tell them (not ask) to give you the autonomous IOS for the AP.

New Member

I can ping it but not browse it AirLap 1242AG-E-K9

is it possible to download the IOS directly from the other 1242AG that i just have ?

The other 4 works fine so exist a way to get from the working one's the config and put it in this one ?

Hall of Fame Super Silver

Re: I can ping it but not browse it AirLap 1242AG-E-K9

It's easier to get it replaced but if you want to try, here is the command you need to use to pull the image from a good AP.

archive tar
To create a TAR file, to list files in a TAR file, or to extract the files from a TAR file, use the archive tar command in privileged EXEC mode.
archive tar {/create destination-url flash:/file-url | /table source-url | /xtract source-url flash:/file-url [dir/file...]}

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_a1.html#wp1047206

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

I can ping it but not browse it AirLap 1242AG-E-K9

Dear Scott where can i download the firmware of this AP ?

i'm not able to donwload the ios from cisco how can i download it ?

i need the c1240-k9w7-tar.default file to upload via tftp in my ap

can u help me ?

have some link or some usefull link to obtain it ?

many thanks'

Omar

Hall of Fame Super Gold

I can ping it but not browse it AirLap 1242AG-E-K9

i'm not able to donwload the ios from cisco how can i download it ?

Download the file from here and rename the file.

New Member

I can ping it but not browse it AirLap 1242AG-E-K9

unfortunatly the link that u gave me need a contract and i don't have it !!

So many many thank's for this usefull link now i must find some friend that have the contract with cisco !! hahaha

great man and great link 

number one !!!!

Service Contract RequiredClose
 
Error To Download this software, you must have a valid service contract associated to your Cisco.com profile.
If you do not have a service contract you can get one through:
  • Your Cisco Account Team if you have a direct purchase agreement with Cisco
  • Your Cisco Partner or Reseller
  Once you have the service contract you must associate your service contract to your Cisco.com user ID with Profile Manager
Hall of Fame Super Gold

I can ping it but not browse it AirLap 1242AG-E-K9

Contact the vendor who sold the AP to you and tell them to furnish you the IOS.

New Member

I can ping it but not browse it AirLap 1242AG-E-K9

Scott you are light years over me ... i think i'm not able to do what u wrote ...

it's so bad understand that i will never be able to do what u suggest !!!!

So i bought this ap via internet and probably i will never get it replaced ...

As some one said ... s***t happens !!! hahahah

Hall of Fame Super Silver

Re: I can ping it but not browse it AirLap 1242AG-E-K9

You might be able to tar an image from one AP and upload it to another. Here is a link.

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37mfw.html#wp1034890

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
2724
Views
12
Helpful
13
Replies