Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

If a 5508 goes off line.....

I have a mix of AIR-LAP1262N and AIR-CAP3502E   LWAPs.  I remember there is a scenario where some LWAPs will continue to function even if the controller goes off-line.  Can anyone tell me what hardware/software configuration I need to make that happen?  No budget for a failover unit at present.

Thanks in advance!  Replies rated.               

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

If a 5508 goes off line.....

Its called FlexConnect.  Take a look at this guide so you better understand the configurations and limitations.

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
2 REPLIES
Hall of Fame Super Silver

If a 5508 goes off line.....

Its called FlexConnect.  Take a look at this guide so you better understand the configurations and limitations.

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

If a 5508 goes off line.....

Thanks Scott!

137
Views
0
Helpful
2
Replies
CreatePlease to create content