01-04-2007 12:59 AM - edited 07-03-2021 01:26 PM
I am trying to implement PEAP on my wireless network.
However my Certificate Authority is installed together with my Domain Controller.
How do i go about implementing?
In the document the CA is on the ACS server
PS: What if i am using a third party CA such as verisign for my server certificate?
01-04-2007 08:35 AM
Hi,
The CA does not have to be installed on the same machine as ACS.
You can get the certificate file from the CA and put it on the ACS machine (for ACS - Windows) or upload it using a FTP Server for ACS Appliance.
After that all you need to do is put in the required files names in the ACS Certification installation page.
01-04-2007 05:38 PM
I was wondering how we are able to do MS Certificate Machine AutoEnrollment.
Need to clarify some thoughts.
If we are using a verisign certificate, we just need to install the root certificate on the domain controller and allow the dc to distribute the root certificate for ACS?
08-20-2009 01:48 PM
Verisign and know public CA's Root certs are installed by default on Windows. To check them:
start>run>mmc
add certificate snap in and under trusted root CA, you should see those CAs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide