Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Implementing multiple WDS domains

I have been told that there is a maximum of 30AP's for WDS. is it possible to create more than one "domain" using a single lan for management IP's and multiple wireless vlans (different ip subnets for each vlan in each domain).

5 REPLIES
Bronze

Re: Implementing multiple WDS domains

30 APs per WDS is just a guideline, not hard limit.

Each subnet can only have one WDS. However, you can have multiple WDSes with one per vlan.

New Member

Re: Implementing multiple WDS domains

But how can the WLSE collect data from more than one WDS ? I can only set the WDS credential, without to specify more than one...

Have you any suggest ?

regards

Luigi

New Member

Re: Implementing multiple WDS domains

What I have been told by TAC is that the WLSE will treat each WDS separately; i.e. you will have two separate managed wireless domains showing up. Radio-management/self-healing/fast-roaming, etc, will not work across the separate WDS domains.

New Member

Re: Implementing multiple WDS domains

Could you please elaborate on the configuration of two seperate WDS's? How can I configure 2 or more WDS's on one VLAN?

Silver

Re: Implementing multiple WDS domains

Only one WDS AP per VLAN.

236
Views
1
Helpful
5
Replies
CreatePlease to create content