Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Incorrect acces using a customized web authentication page

I have a cisco 5508 wireless controller with 7.6.100.0 software version installed. I use the Web Authentication type with default web page that I modified to add my company logo. My problem is that the system only take the username to authenticate the user, even if the password is incorrect. can anybody help find a solution ?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

means there is problem in

means there is problem in html code.

Try to upload webauth bundle provided by cisco and then try to modify it.

From where to download:

http://software.cisco.com/download/release.html?mdfid=282600534&flowid=7012&softwareid=282791507&release=1.0.2&relind=AVAILABLE&rellifecycle=&reltype=latest

 

Regards

Dont forget to rate helpful posts

 

2 REPLIES
VIP Purple

means there is problem in

means there is problem in html code.

Try to upload webauth bundle provided by cisco and then try to modify it.

From where to download:

http://software.cisco.com/download/release.html?mdfid=282600534&flowid=7012&softwareid=282791507&release=1.0.2&relind=AVAILABLE&rellifecycle=&reltype=latest

 

Regards

Dont forget to rate helpful posts

 

Bronze

Hi,Yes it's better 1st try by

Hi,

Yes it's better 1st try by uploading the webauth bundle and make customization on it and then try.

 

33
Views
0
Helpful
2
Replies
CreatePlease to create content