Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Installation of WCS (Wireless Control Server)

We are facing problem when trying to browse from different computer

1 REPLY
Hall of Fame Super Red

Re: Installation of WCS (Wireless Control Server)

Hi Suresh,

Have a look at the following;

WCS User Interface

The WCS user interface enables the network operator to create and configure Cisco Unified Wireless Network Solution coverage area layouts, configure system operating parameters, monitor real-time Cisco Unified Wireless Network Solution operation, and perform troubleshooting tasks using an **HTTPS web browser window. The WCS user interface also enables the WCS administrator to create, modify, and delete user accounts; change passwords; assign permissions; and schedule periodic maintenance tasks. The administrator creates new usernames and passwords and assigns them to predefined permissions groups.

-----------------------------------------------------------------------

Note: Cisco recommends Internet Explorer 6.0 or later on a Windows workstation for full access to WCS functionality.

For example, in the web browser address field, enter https://176.89.43.44

where

https:// is a secure (http + Secure Sockets Layer) login, to which the Cisco WCS usually returns a Security Alert message before continuing.

localhost is used when the web browser is on the Cisco WCS Server.

Cisco WCS IP Address is the IP Address of the Cisco WCS on any other workstation.

From this doc;

http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html

Hope this helps!

Rob

330
Views
0
Helpful
1
Replies
CreatePlease login to create content