Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Integrating WCS with ACS

I have a significant amount of Lan Administrators who need access to WCS. I'd like to be able to use ACS for their log in and accounting. However, as simple as it seems on the documenation, I just cannot seem to get it to work.

Steps I have done:

1) configured TACACS server

2) configured in ACS with shared key

3) chose TACACS mode on WCS

Authenication still remains local. does anyone have this working and is there another step?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Integrating WCS with ACS

when you want to use TACACS for WCS you need to build the service for it as it is not there by default. Take a look at the WCS config guide in how to create the service in TACACS.

http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0admin.html#wp1059647

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
10 REPLIES
Silver

Integrating WCS with ACS

When you set the mode to TACACS what did you set as the failback?

The user you are using to test with is somethign other than root correct?

New Member

Integrating WCS with ACS

enable fallback to local on auth failure or no server response

Integrating WCS with ACS

Under AAA mode did you unselect local and select TACACS ?

See attached

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

Integrating WCS with ACS

Yes I did that step. As well as enable fallback to local on auth failure or no server response

Re: Integrating WCS with ACS

when you buIlt the new service did you put in HTTPS? It is case sensitive.

Can you screenshot the new service config as well as the entries under the group or user where you define the role?

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Integrating WCS with ACS

not sure what you mean by HTTPS or new service config.

All the steps that i performed were under Administration>AAA Mode and Administration>TACACS+

Silver

Integrating WCS with ACS

What version of ACS?

Did you go through in ACS and add all the tasks?

Integrating WCS with ACS

Did you set up virtual domains ? Are your admins part of the ADMIN domain ? You will need to make sure they are part of the admin group with the admin attributes.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Integrating WCS with ACS

when you want to use TACACS for WCS you need to build the service for it as it is not there by default. Take a look at the WCS config guide in how to create the service in TACACS.

http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0admin.html#wp1059647

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: Integrating WCS with ACS

Thanks. I knew it seemed too easy.

502
Views
0
Helpful
10
Replies