Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Interference Threshold Violated

I know this has been talked about many times on this forum, but as I am upgrading my WiSM's and WCS server, I seem to be getting more of these minor alarms everyday. The alarm looks like this:

AP 'MB:3:17', interface '802.11b/g' on Controller '10.60.1.142'. Interference threshold violated.

My question is this... what changes on the WCS or WiSM's can I make to prevent this message from occurring?

Thanks in advance for the help.

2 REPLIES
Silver

Re: Interference Threshold Violated

The snmp trap "LRADIF_INTERFERENCE_PROFILE_FAILED" added in version 2.0 in the following URL clearly explains this message and the recommended action.

http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b72fe.html#wp1134273

Community Member

Re: Interference Threshold Violated

Thanks for the link. That clears alot of the issues I'm having up.

271
Views
0
Helpful
2
Replies
CreatePlease to create content