Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Internet access to Wireless clients

I am using a PIX 525 to separate a WLAN from the Core network. The outside interface points to the WLAN. Using statics and ACL's I can get access to corporate assests, but I can not figure out how to get the wireless clients access to the Internet.

WLAN subnet is 10.40.50.0 Inside Pix interface is 10.40.60.1, I have set up a NAT pool on my outside PIX, but the packets are never getting that far.

My guess is I have to set up a static at the WLAN PIX, but how do I static the Internet. (0.0.0.0) does not work.

1 REPLY
Silver

Re: Internet access to Wireless clients

Try upgrading the firmware in the Wireless Clients . This might solve the issue.

142
Views
0
Helpful
1
Replies