Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS to LWAPP Upgrade

Hello would like to hear any feedback regarding an enterprise LWAPP upgrade from IOS. About to undergo this project and have check all references for infrastructure setup. All APs are C1230 series with req'd code. Looking for any unknown issues which you experienced during your migration. Thanks

2 REPLIES

Re: IOS to LWAPP Upgrade

Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode

http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/prod_tech

nical_reference09186a00804fc3dc.html#wp23144

This requires a PC tool, which will generate certificates, and create a hash file, necessary to get the IOS AP into the LWAPP mode and recognized by the controller. I've attached the guide, which provides the steps to convert, or re-vert an IOS AP to LWAPP,

and will be happy to answer your questions or provide any other assistance you need. It is best, if your AP is in the same VLAN

subnet as the controller, and you will need a DHCP server on this network, to provide an IP address to the APs because this is Layer3. We can manage IOS APs on the c2006 and c440x platforms of WLC. Section 6 of this guide describes DNS and DHCP option 43 methods of feeding your WLC's Management Interface address to the APs.

Regards,

New Member

Re: IOS to LWAPP Upgrade

I am quite familiar with this guide and Cisco wireless. I am seeking any issues or unknowns which occurred during the upgrade. Don't want to be blindsided.

272
Views
0
Helpful
2
Replies