ISE vlan mapping.

[yusuf.ujjainwala]

have one query for ISE 1.2

Is the following scenario is supported with ISE?

Can we configure ISE VLAN mapping with SSID authentication web auth only.

[Viten Patel]

Can you explain a bit more? If i understood correctly, this will not work. ISE can do a AAA override for 802.1X auth.

I ll need to check but 7.5 code may support 802.1X + webauth

This is something which may work

Sent from Cisco Technical Support iPhone App

[Tarik Admani]

If you are using mac-filtering with Central Web Auth then this should be supported. However if you are using local web auth, you will have to wait for Viten's response.

Thanks,

Tarik Admani
*Please rate helpful posts*

[blenka]

Limitations

No support for  guest clients – posture for guest user is not supported.
Hreap local switching is not supported -
No support for wlans without 802.1x support
Client will go through posture during slow roam – when client is associated used 802.1x (not wpa2 or cckm) then when client roams from one wlc to other – wlc will send new session ID hence client will again go through posture validation process.
No support for guest tunneling mobility
Mac auth bypass is not supported
Vlan pooling is not supported.
No support for WGB AP
No support for AP group.
Kindly find the link information regarding integration is mention.

https://supportforums.cisco.com/docs/DOC-18121