Issue regarding WLC and ACS (RADIUS) authentication method
If you use any type of radius for wireless user authentication, then you most likely will be using 802.1x, which does require a certificate. Even if you did local ACS users, the ACS would require a certificate installed for 802.1x. If you do not wish to use a certificate, then you would have to go with pre-shared keys and you wouldn't be using the readius.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...