I've been trying to config 2 access point with limited access to add mac address and save the running config to startup config for selected helpdesk user. When the user login the correct privilege level is applied but when they try to save running config t start up config they getting permission denied.
aaa authentication login RAD_AUTH group radius local aaa authorization exec default group radius local
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...