above link is gateway to all wireless security document
In the leap process there are two keys
a) Session key ( unicast key )
b) broadcast key
Session key is independently generated by client and AP . It is important to note that this session key is dynamic in nature and this session timeout can be configured on the radius server ( 27 parameter )
Now broadcast key is static in nature . If you want to make is dynamic than on
Ap go to setup->Radio advance
You can turn on Bkey rotation here .
Now if you turn on Bkey rotation your wep client will break . Also keep in mind that when you enable leap either turn on Bkey rotation or define key 1 in slot Key1
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...