cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
460
Views
0
Helpful
2
Replies

LEAP and EAP authentication

greg.murray
Level 1
Level 1

On a single Access Point, can you run Cisco LEAP authenticating some supplicants to a Cisco ACS server as well as running EAP, authenticating another group of supplicants to a Microsoft RADIUS server?

1 Accepted Solution

Accepted Solutions

baileja
Level 1
Level 1

Yes, the AP is configured exactly the same for EAP, PEAP, LEAP, etc, etc. Its the client and the radius that have seperate configs. We are using LEAP and PEAP in conjunction and the AP requires no different configs to support each. So to answer your question, yes you can.

View solution in original post

2 Replies 2

baileja
Level 1
Level 1

Yes, the AP is configured exactly the same for EAP, PEAP, LEAP, etc, etc. Its the client and the radius that have seperate configs. We are using LEAP and PEAP in conjunction and the AP requires no different configs to support each. So to answer your question, yes you can.

baileja
Level 1
Level 1

To achieve this you must define seperate SSID's for each with it authenticating to a seperate server.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: