Im currently trying to setup LEAP, we have one RADIUS server (ACS 3.1). I can get the clients to login with no problem, however Im working on what to do when the RADIUS server fails. I wrote this into the config:
aaa authentication login eap_methods group rad_eap none
aaa authentication login eap_methods group rad_eap local
As I would like it to either just let the person in or use the local database. However neither none or local will authenticate them if I disable the radius server. Any ideas?
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...