Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LEAP - Open or Network-Eap

Hi,

Can somebody explain to me what the difference is between selecting just Network-Eap as Accept Authentication Type and selecting Open as Accept Authentication Type with Require EAP also selected, for both options with Full Encryption?

Thanks,

Joost Koopmans

1 REPLY
Bronze

Re: LEAP - Open or Network-Eap

Selecting the "Network-EAP" option in "Accept Authentication Type" will enable LEAP authentication

Selecting (a)Open in "Accept Authentication Type." and (b) "Require EAP"(only under open authentication) will enable EAP-TLS authentication (also enables EAP MD5):

If you want to enable both do the following:

i. Check Open in "Accept Authentication Type."

ii. Check "Require EAP" (only under open authentication).

iii. Select the "Network-EAP" option.

If you do this, the access point is configured to allow only LEAP and EAP-TLS/MD5 clients to authenticate to the enterprise wireless LAN network.

Some documents useful can be found at:

http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/acstl_wp.htm

145
Views
0
Helpful
1
Replies
CreatePlease login to create content