You can just install the aironet drivers from the aironet client install (option is available when you install). This will work with CCX compliant (or aironet extensions) cards. Check if your non-Cisco cards are and this will let you use LEAP with non-Cisco cards as long as they are CCX compliant.
I really don't think you can use the ACU on a non-Aironet CCX card. I wish it were the case. I tried it with Dell Trumobile 1300 cards and it did not work.
I used their built-in LEAP client but was horrible (and still is). I opened a case with Cisco and they indicated that the intention of CCX was to support CKIP & WDS but not necessarily be compatible with the ACU.
I had also tried using the ACU for TM1300. FYI on your issues with leap issues with TM1300. Dell is on verge of release new driver to address many of the LEAP issues (among others) in next week or so. I'm waiting to see if it gets any better!
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...