Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Limit Peer to Peer communication for Wireless Guest users

Hello,

We have a WLAN configured on our WLC 5508 (7.5.102.0) for guest wireless users using simple PSK for authentication.  How can I block wireless guest devices from being able to see other devices on the same wireless network.   As an example if I run a ping sweep while connected to this network I get responses from other devices.  Basically I want to ensure that no devices are able to communicate on any level to other devices on that network but being able to access the default gateway for Internet access.

What's the best way to accomplish this?

Thanks,

Joe

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Under your SSID profile, go

Under your SSID profile, go to Advanced > P2P Blocking Action.  Choose DROP.

3 REPLIES
Hall of Fame Super Gold

Under your SSID profile, go

Under your SSID profile, go to Advanced > P2P Blocking Action.  Choose DROP.

Besides what Leo mentioned,

Besides what Leo mentioned, you can do it from CLI:

config wlan peer-blocking drop <wlan ID>

To know your WLAN ID, use the command "show wlan summary".

 

Regards,

 

Amjad

Rating useful replies is more useful than saying "Thank you"
Bronze

Hi, Go through the below link

Hi, 

Go through the below link for detail and step by step configuration guide of peer-to-peer blocking in WLC 

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_wlan.html#wp1161858

153
Views
0
Helpful
3
Replies
CreatePlease to create content