10-12-2014 10:19 PM - edited 07-05-2021 01:42 AM
We have the WLC 5760 work with the NPS & AD server for 802.1x authentication enterprise wireless .
How can we do to achieve the result of only one device can be connect to wireless per account ?
Any setting on WLC to do that ?
10-12-2014 11:22 PM
Hi,
I dont about 5760 wlc but in other WLC models there is a option " Max Concurrent Logins for a user name"
Go here: Security > AAA > User logon Policies , there you will see this option , set to 1.
Regards
Dont forget to rate helpful posts
09-12-2015 04:53 AM
09-13-2015 11:39 PM
Check the below relevant post.
https://supportforums.cisco.com/discussion/12387596/limiting-concurrent-user-logins-5760
09-15-2015 05:26 AM
Refer the BUG :
Symptom:
In ACS we have a feature called Max User Session: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/access_policies.html#wp1162177.
Now with NGWC 5760 or 3850, this feature is not working.
We configure NGWC with accounting and calling-station-id=macaddress, as mentioned on the configuration guide however the enforcement is not done.
As example, if we configure 1 as max session, we get an access accept on the second login as well and 2 active sessions appear on the ACS...
Conditions:
Configure Max User Session.
Use NGWC 5760 or 3850 as aaa client and configure NGWC with accounting and calling-station-id=macaddress, as mentioned on the configuration guide.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: