I'm trying to create a lobby admin account on my WLC, easy enough I go to Management>Local Management Users> Create the user and assign him as a Lobby Admin. However, when I attempt to login as that lobby admin I am never allowed in, it just wont let me login as that user. If I look at the WLC logs it reads: Jul 14 16:10:29.282 ews_auth.c:1968 EMWEB-1-LOGIN_FAILED: Login failed. User:nicolasmin. Service-Type is not present or it doesn't allow READ/WRITE permission..
Does anyone know what that means and how I could fix it?
Yes I have radius configured but it is only authenticating wireless clients. I have a number of Lobby Admins created and all can log in to the same controller without issue it just doesnt seem to like this name, even if I create a test account it works.
If your authenticating using a local account created on the WLC, then local should be priority or on the top of the list. Is you are using radius for local management, then you would need to keep radius on the top of the list and create another policy in radius for lobby admin. Lobby admin uses a different service type than management users.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...