Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

local EAP auth..

 

 Hi..

Is it possible to configure local EAP Authentication using EAP-fast when active directory server is not both CA server & AD server. Although CA server is antoher standlone server in network.

 

Pls help.

3 REPLIES
VIP Purple

Hi,Yes, you should able to do

Hi,

Yes, you should able to do this.

Here is Local EAP configuration on WLC (example used version 7.0.116.0 on WLC)

http://mrncciew.com/2013/04/21/configuring-local-eap-on-wlc/

If you are using later WLC software versions refer the configuration guide for that version.

http://www.cisco.com/c/en/us/support/wireless/virtual-wireless-controller/products-installation-and-configuration-guides-list.html

 

HTH

Rasika

**** Pls rate all useful responses ****

New Member

 Thanks..  Could you pls

 

Thanks..

 

 Could you pls share reference guide to configure EAP-FAST using certificate authentication where CA server is not AD server since on cisco example are given when AD server is CA server too.

Hall of Fame Super Silver

I don't think your going to

I don't think your going to find an example other than what Rasika posted.  It's usually up to the user to figure the configuration out themselves. The Cisco examples explained how to setup the wireless portion, but not other vendors equipment for the most part. Microsoft is mostly used in examples since it most widely deployed. 

-Scott
*** Please rate helpful posts ***
47
Views
0
Helpful
3
Replies