Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LWAPP AP1232 not able to join Controller

After AP1232 convertion from IOS to LWAPP -> following error Message

*Mar 1 00:00:44.216: %LWAPP-5-CHANGED: LWAPP changed state to JOIN

*Mar 1 00:00:50.217: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response

*Mar 1 00:00:50.217: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.

*Mar 1 00:00:50.249: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.

*Mar 1 00:00:50.249: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.

2 REPLIES
Hall of Fame Super Red

Re: LWAPP AP1232 not able to join Controller

Hi Stephan,

This is a pretty common problem that is usually associated with one of 2 things;

1. The time setting on the WLC and the PC running the upgrade tool (must be in sync).

2. A problem with the SSC (Self Signed Certificate).

Have a look at these great threads from earlier this year that provide answers to both problems. Perhaps you could also let us know what WLC Model and what version you are running.

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddb4d26

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddaba5b

Hope this helps!

Rob

Please remember to rate helpful posts.....

New Member

Re: LWAPP AP1232 not able to join Controller

Hi Rob,

Thanks for your information will check it and come back to you....

HW: WLC-4402

SW: AIR-WLC4400-K9-4-0-179-8.aes

Greets

Stephan

312
Views
4
Helpful
2
Replies
CreatePlease to create content