Mac Address Add on Cisco Controller.

[MOHAMMAD RAZA]

Hi,

On my controller have multiple SSID configured, mac filter is also enabled, now i want to add one MAC address for two SSID.

Pls any one help on this.

Regards,

Nafis Ashique 

[Sandeep Choudhary]

Go to Security > AAA > Mac Filtering

Then clcik on New.

Here put the MAC address, select Any Profile, Interface-None and leave empty other option.

Regards

Dont forget to rate helpful posts

[MOHAMMAD RAZA]

Hi Sandeep,

Thanks for your Quick reply.

Suppose mac address is aa:aa:aa:aa and my ssid is a1, b1 and c1, now i want to do aa:aa:aa:aa can only connect a1 & b1 but not on c1.

As per your reply aa:aa:aa:aa can connect on every SSID.

Regards,

Nafis Ashique 

[Sandeep Choudhary]

I think this cant be done on wlc alone, you must ahve a RADIUS server for this.

You must use: RADIUS-Based VLAN Access Control

Regards

[MOHAMMAD RAZA]

Ok,

if you have any document for the same pls put the url Link.

Regards,

Nafis Ashique

[Sandeep Choudhary]

check these:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71683-dynamicvlan-config.html#switch

https://supportforums.cisco.com/document/15431/how-implement-radius-based-vlan-access-control-features-access-point

Regards