Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Mac Address Add on Cisco Controller.

Hi,

On my controller have multiple SSID configured, mac filter is also enabled, now i want to add one MAC address for two SSID.

Pls any one help on this.

 

Regards,

Nafis Ashique 

5 REPLIES
VIP Purple

Go to Security > AAA > Mac

Go to Security > AAA > Mac Filtering

 

Then clcik on New.

Here put the MAC address, select Any Profile, Interface-None and leave empty other option.

 

Regards

Dont forget to rate helpful posts

New Member

Hi Sandeep,Thanks for your

Hi Sandeep,

Thanks for your Quick reply.

Suppose mac address is aa:aa:aa:aa and my ssid is a1, b1 and c1, now i want to do aa:aa:aa:aa can only connect a1 & b1 but not on c1.

As per your reply aa:aa:aa:aa can connect on every SSID.

 

Regards,

Nafis Ashique 

VIP Purple

I think this cant be done on

I think this cant be done on wlc alone, you must ahve a RADIUS server for this.

You must use: RADIUS-Based VLAN Access Control

 

Regards

 

New Member

Ok,if you have any document

Ok,

if you have any document for the same pls put the url Link.

 

Regards,

Nafis Ashique

VIP Purple

check these:http://www.cisco

check these:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71683-dynamicvlan-config.html#switch

 

https://supportforums.cisco.com/document/15431/how-implement-radius-based-vlan-access-control-features-access-point

 

Regards

35
Views
0
Helpful
5
Replies
CreatePlease to create content