Re: Mac-address authentication with ACS by SSID/GROUP
There is a feature called "Per User VLAN Assignment" which should provide you with just the protection you're looking for. It uses the ACS Server to assign a user to a VLAN, regardless of what SSID they connect to the access point with. Per User VLAN Assignment requires IOS version 12.2(11)JA1.
No configuration changes are made on the AP to engage per user VLAN assignment. All the configuration changes are made on the ACS. For more details check out the following URL,
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...