Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Mac filtering, WPA2 AES PSK, 802.11N setup.

I facing a problem that using mac filtering, WPA2/AES/PSK on WLC.

When I enable MAC filtering, client cannot connect it.

I would like to setup a ssid that support 802.11N, WPA2 key and Mac filtering without radius server.

Any people can help?

I try the temp solution that mac filter on switch.

1 REPLY
Community Member

Re: Mac filtering, WPA2 AES PSK, 802.11N setup.

This document explains how to configure MAC filters with wireless LAN controllers (WLCs) with a configuration example.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml#req

You can configure the 802.11b/g/n (2.4-GHz) and 802.11a/n (5-GHz) bands for the controller to comply with the regulatory requirements in your country. By default, both 802.11b/g/n and 802.11a/n are enabled.

http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52ccfg.html#wp1082386

971
Views
0
Helpful
1
Replies
CreatePlease to create content