Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Managing and Monitoring 5760 (or not)

Wow- am seriously confused by what the 5760 is supposed to even be at this point. If PI can't manage and monitor it, how are you supposed to push any sort of templates or get trending and history from 1000 APs and and all of the clients that attach to it? What am I missing?

5 REPLIES
Hall of Fame Super Silver

Re: Managing and Monitoring 5760 (or not)

You just answered your question in a way.... You can't. PI 2.0 will have support for the 3850 and the 5760's but how much support is the question. PI 2.0 will not be out until the end if August early September.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Re: Managing and Monitoring 5760 (or not)

Wondering why it was even released then? Something that can do 1000 APs but is essentially unmanageable? How can that be a good marketing story?

Hall of Fame Super Silver

Re: Managing and Monitoring 5760 (or not)

I asked them the same thing at Cisco Live this year... So how they see it now is that you have to point your 3850's to the 5760's in your case and everything should be handled by the 5760 which would be your MC. This is one reason we have not pursued this with our clients because of compatibility and feature parity that is missing.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Managing and Monitoring 5760 (or not)

My suffering bunions. I've heard it all at this point.

Managing and Monitoring 5760 (or not)

It is very unfortunate but PI 2.0 will support it which is in roadmap. Most probably it will be available till end of august 2013.

301
Views
4
Helpful
5
Replies
CreatePlease to create content