06-16-2007 03:04 AM - edited 07-03-2021 02:13 PM
hi i have a wcs and how can i mantain
the wireless coverage through the wsc plan?(( i mean i dont want the wirless coverage to do out the building edge))
((i have put the plan and assigned the access point on them))
06-16-2007 06:21 AM
perform a site survey and determine the location
of the AP's power settings and channel allocations.
After you have installed your system go back and manually configure each AP to the settings you determined during the survey, effectively turning auto RF off.
06-17-2007 10:01 PM
Hi
Thanks for your help...
But in this way I will re-assign the power and channel manually ... I though we could do it automatically by the WCS just telling him that we want no coverage out side the building edge
06-18-2007 04:59 AM
Hi Muzaffar,
John is on this case and knows from experience here (5 points for your good work John). This is a known issue, and I'm sure there is even an open Bug related to this, that I can't seem to find right now. Here is a recent thread that details many of these issues.
It is sad but true, that DCA and RRM are not quite up to snuff yet :(
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide