Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

mDNS cannot be configured when FlexConnect Local Switching is enabled

I am running Cisco Prime Infrastructu tore 1.3 and I am trying to push a template to allow flexconect local switching on a wlan.  However, when I attempt this, I get the message "mDNS cannot be configured when FlexConnect Local Switching is enabled" and I cannot save the template or apply it to controllers.  My controllers are WISM 2s running 7.0.235.3.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: mDNS cannot be configured when FlexConnect Local Switching i

Make sure you uncheck the mDNS option on the advanced tab of the WLAN template. You cannot use mDNS in conjunction with Flexconnect locally switched WLANs.



Sent from Cisco Technical Support iPhone App

2 REPLIES

Re: mDNS cannot be configured when FlexConnect Local Switching i

Make sure you uncheck the mDNS option on the advanced tab of the WLAN template. You cannot use mDNS in conjunction with Flexconnect locally switched WLANs.



Sent from Cisco Technical Support iPhone App

Community Member

Re: mDNS cannot be configured when FlexConnect Local Switching i

hehehe.  I guess I should have scrolled down.  I couldn't see the setting.  I'm good.  thanks.

530
Views
0
Helpful
2
Replies
CreatePlease to create content