Mgt Auth via TACACS+/Wireless User Auth via RADIUS
I'm trying to determine if it's possible to authenticate a management user to the WLC via TACACS+ and still use RADIUS to authenticate the wireless users (802.1x)? Auth server is ACS. I don't know ACS - it looks like I can set it up on the WLC side, however from the ACS side - the WLC's IP is already configured as a RADIUS client for the 802.1x auth of the wireless users...can the same WLC IP also be configured as a TACACS+ client?!?
Basically, I guess this is more of an ACS question...
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...