Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Migrating AP's Between 4404 Controller Sets

I am working with two sets of Cisco 4404 wireless controllers and would like to balance the AP's between the two sets. One set has 90% of the AP's associating with them and the other set only has 10%. Is there an easy migration tool I could use to move 40% of the AP's off the heavier used controller to the less used one. If not in the current controller software does WCS support this. The customer does not have WCS but I am curious if it does.

1 REPLY
Hall of Fame Super Silver

Re: Migrating AP's Between 4404 Controller Sets

WCS will allow you to create a template so you can configure the primary and secondary controllers. Then you can push the template out to which ever ap's you want. It will be faster using WCS, but you can do this manually if you don't have wcs.

-Scott
*** Please rate helpful posts ***
118
Views
0
Helpful
1
Replies