Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Minor Alret at prime infrastructure 2.0 about mismatch configuration.

Dears,

kindly i have minor Alert at prime infrastructure 2.0 (Audit done at '2013-nov-28,05:00:00 CET'..config difference found between NCS and Controller),

what this error and please feed me back with steps to solve this problem.

Thanks,

7 REPLIES
Hall of Fame Super Silver

Re: Minor Alret at prime infrastructure 2.0 about mismatch confi

The WLC and PI don't sync... So if you make a change to your WLC, eventually when PI pills the WLC, there will be a mismatch. To clear the mismatch, you just need to refresh the configuration from the WLC on PI.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Minor Alret at prime infrastructure 2.0 about mismatch configura

Thanks Scott can you advice with steps

VIP Purple

Re: Minor Alret at prime infrastructure 2.0 about mismatch confi

Hi Ahmed,

adding to Scott:

Login in Prime Infra.

First check your theme(Classic or Lifecycle).......Go to Root and see the Theme.

There are steps for classic theme

Go to Configure> Controllers

and then which controller have config mismatch...on right side click on mismatch in Audit status tab.

After that it will ask for audit now, click on that. After auditing it will show you the two option:

1. Restore PI values to Controller

2. Refresh config from controler

Clcik on 2nd #Refresh config from controler#

Then select 2nd option again(Use the configuration on the controller currently) and click on GO.

Regards

Dont forget to rate helpful posts


New Member

Re: Minor Alret at prime infrastructure 2.0 about mismatch confi

thanks i will try and feed back you, but please can you tell me if i choose #Refresh config from controler# this is will need down time or not.

VIP Purple

Minor Alret at prime infrastructure 2.0 about mismatch configura

HI Ahmed,

No need.....for downtime.

It will just updated the config on PI from controller.

Regards

Dont forget to rate helpful posts

New Member

Cool!this two year old post

Cool!

this two year old post solved my current "config difference found between NCS and Controller" problem.

Thanks, Sandeep!

 

 


 

New Member

Hi Sandeep,

Hi Sandeep,

Thanks for your support, I am getting same message and now it is resolved.

935
Views
15
Helpful
7
Replies