Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Mobility Issue - " Control and Data Path Down"

Dear Team,

 

I am trying to configure the mobility groups in my 2 Cisco 5508 WLC running with code 7.4.110.0.   Both of my controller management Ip is reachable and both WLC virtual ip is configured with 1.1.1.1.  I completed below steps to configure the mobility groups

 

1) Created new mobility group with Name "Mobiltiy" in both contoller.

2) management and mac address has been assigned respectively.

3) Not configured the multicast option, however after enabling multicasting option with the Ips 239.0.0.2 and 239.0.0., it is not working.

 

I am getting the mobility status as "Control and Data Path Down", where I am able to ping the both the WLC each other. Kindly help me to resolve this issue.

 

Regards,

Jubair.S

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Still you have diff local

Still you have diff local mobility group name on both wlc.

wireless1 pic shows: copr.sva.com

wireless1 pic shows: default

Try to be in same mobility group name.

 

Regards

7 REPLIES
Gold

Hi Jubair,Do you have any

Hi Jubair,

Do you have any firewall or acl blocking the ports between the WLC's?

Have you configured mobility group configuration on the both WLC's are per below procedure?

http://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/7-4/configuration/guides/mobility/config_mobility.pdf

Regards

Najaf

Gold

Hi Jubair,Could you please

 

 

VIP Purple

 You have Name on:1st wlc:

 

You have Name on:

1st wlc: corp.sva.com

2nd WLC: Mobility

 

Can you put both controller in same Mobility group name and then try it.

 

Hope it helps.

Regards

Community Member

dear Sandeep, Screen shot is

dear Sandeep,

 

Screen shot is attached for one of the WLC screen shot. corp.sva.com is the default mobility group in the WLC and Mobility is the  name we have defined manually for mobility group. Please find the both WLC screen shot as attached. Both the controller is in the same mobilty group name only. Kindly check the attachement.

 

dear Najaf,

 

There is no ACL/firewall in between these WLC. I configured as per the attached document only.

 

 

Regards,

Jubair.S

 

Community Member

Dear Team, I tried to conduct

Dear Team,

 

I tried to conduct mping and eping, which is not working. Kindly let us know what is missed in my configuration.

VIP Purple

Still you have diff local

Still you have diff local mobility group name on both wlc.

wireless1 pic shows: copr.sva.com

wireless1 pic shows: default

Try to be in same mobility group name.

 

Regards

Community Member

Thanks a lot Sandeep, It is

Thanks a lot Sandeep,

 

It is working fine now....

496
Views
0
Helpful
7
Replies
CreatePlease to create content