Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
ben
Community Member

Monitoring Aironet 350 Bridge Link Signal Strength

Hello,

Does anyone have ideas/examples on using SNMP to query 350 series bridges to obtain running data on signal strength & quality? I would like to use something like MRTG to monitor signal strength, along with link usage.

Looking through the MIB files (especially ftp://ftp.cisco.com/pub/mibs/v2/AWCVX-MIB.my)

it looks like awcDot11TpFdbLatestRxSignalStrength is what I'm after, however I cannot see how to properly reference this. When I walk the tree from 1.3.6.1.4.1.522.3.12 it doesn't seem to list the relevant values.

Any help/advice most appreciated!

Thanks,

Ben Trigger

1 REPLY
ben
Community Member

Re: Monitoring Aironet 350 Bridge Link Signal Strength

PS - when I walk the tree i get the following:

snmpwalk -c public 172.16.0.2 1.3.6.1.4.1.522.3.12

SNMPv2-SMI::enterprises.522.3.12.1.1.0 = INTEGER: 10

SNMPv2-SMI::enterprises.522.3.12.1.3.0 = INTEGER: 2

SNMPv2-SMI::enterprises.522.3.12.1.5.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.7.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.8.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.9.0 = INTEGER: 1

SNMPv2-SMI::enterprises.522.3.12.1.10.0 = INTEGER: 1

SNMPv2-SMI::enterprises.522.3.12.1.11.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.12.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.13.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.14.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.1.15.0 = INTEGER: 1

SNMPv2-SMI::enterprises.522.3.12.1.16.0 = INTEGER: 0

SNMPv2-SMI::enterprises.522.3.12.2.1.0 = INTEGER: 8192

SNMPv2-SMI::enterprises.522.3.12.2.2.0 = Gauge32: 300

SNMPv2-SMI::enterprises.522.3.12.2.3.0 = Gauge32: 28800

SNMPv2-SMI::enterprises.522.3.12.2.4.0 = Gauge32: 1800

SNMPv2-SMI::enterprises.522.3.12.2.5.0 = Gauge32: 1800

SNMPv2-SMI::enterprises.522.3.12.2.6.0 = Gauge32: 1800

SNMPv2-SMI::enterprises.522.3.12.2.7.0 = Gauge32: 28800

SNMPv2-SMI::enterprises.522.3.12.2.8.0 = Gauge32: 28800

SNMPv2-SMI::enterprises.522.3.12.2.9.0 = Gauge32: 28800

SNMPv2-SMI::enterprises.522.3.12.2.10.0 = Gauge32: 28800

SNMPv2-SMI::enterprises.522.3.12.2.11.0 = INTEGER: 1

SNMPv2-SMI::enterprises.522.3.12.2.12.0 = INTEGER: 2

SNMPv2-SMI::enterprises.522.3.12.2.13.0 = INTEGER: 30

SNMPv2-SMI::enterprises.522.3.12.2.14.0 = INTEGER: 2

181
Views
0
Helpful
1
Replies
CreatePlease to create content