Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

MS IAS RADIUS for WLC management authentication

Is it possible to use Microsoft IAS RADIUS server to authenticate to the web-based management interface of Wireless LAN Controller 4402? Is there a document available for that?

3 REPLIES

Re: MS IAS RADIUS for WLC management authentication

New Member

Re: MS IAS RADIUS for WLC management authentication

Has anyone gotten authentication for the HTTPS login to the management interface working through MS IAS?  I would rather use LDAP if someone knows how to do that, but in the WLC management interface, the only options for Security/Priority Order/Management User are TACACS, RADIUS, and Local.  Using RADIUS to authenticate the login to the management interface, would any attributes need to be set, because they appear to be for WLAN users;

WLAN-ID, QOS Level, DSCP Setting, 802.1p Tag, Interface Name, and ACL Name.  The document I'm using doesn't give a lot of guidance;

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008082d5b5.shtml#C2

Cisco Employee

Re: MS IAS RADIUS for WLC management authentication

Hi,

you're looking too far away I think. Attributes are needed only if your user is a LobbyAdmin as far as I remember. Attributes are needed if you use tacacs though but I don't remember any for radius.

Just configure IAS to authenticate users and the WLC to have the IAS as radius server for management users. It should do the trick.

Nicolas

2385
Views
5
Helpful
3
Replies
CreatePlease to create content