Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MSE gui access

Hi,

I am not able to access MSE via web, pls help. attached the screenshot when i access using gui.

 

[root@ciscomse ~]# /etc/init.d/msed status
STATUS:
Health Monitor is running
Starting MSE Platform, Waiting to check the status.
MSE services are up, getting the status

-------------
Server Config
-------------

Product name: Cisco Mobility Service Engine
Version: 7.2.110.0
Health Monitor Ip Address: 1.1.1.1
High Availability Role: 1
Hw Version: V01
Hw Product Identifier: AIR-MSE-3355-K9
Hw Serial Number: KQ3C9CK
Use HTTP: true
Legacy HTTPS: true
Legacy Port: 8001
Log Modules: -1
Log Level: INFO
Days to keep events: 2
Session timeout in mins: 30
DB backup in days: 2

-------------
Services
-------------

Service Name: Context Aware Service
Service Version: 7.2.1.54
Admin Status: Enabled
Operation Status: Up

Service Name: Wireless Intrusion Protection Service
Service Version: 1.0.3010.0
Admin Status: Enabled
Operation Status: Up

Service Name: MSAP Service
Service Version: 1.0.2.37
Admin Status: Enabled
Operation Status: Up

--------------
Server Monitor
--------------


Server start time: Sat Oct 11 18:21:38 IST 2014
Server current time: Thu Oct 30 21:27:51 IST 2014
Server timezone: Asia/Calcutta
Server timezone offset: 19800000
Restarts: 19
Used Memory (bytes): 43157144
Allocated Memory (bytes): 535232512
Max Memory (bytes): 535232512
DB virtual memory (kbytes): 0
DB virtual memory limit (bytes): 0
DB disk memory (bytes): 5293762176
DB free size (kbytes): 0

---------------
Active Sessions
---------------

Session ID: 29717
Session User ID: 1
Session IP Address: 10.158.9.53
Session start time: Wed Oct 29 23:44:14 IST 2014
Session last access time: Thu Oct 30 21:26:48 IST 2014

-------------
Context Aware Service
-------------

Total Active Elements(Wireless Clients, Tags, Rogue APs, Rogue Clients, Interferers, Wired Clients): 0
Active Wireless Clients: 0
Active Tags: 0
Active Rogue APs: 0
Active Rogue Clients: 0
Active Interferers: 0
Active Wired Clients: 0
Active Elements(Wireless Clients, Rogue APs, Rogue Clients, Interferers, Wired Clients, Tags) Limit: 0
Active Sessions: 1
Wireless Clients Not Tracked due to the limiting: 0
Tags Not Tracked due to the limiting: 0
Rogue APs Not Tracked due to the limiting: 0
Rogue Clients Not Tracked due to the limiting: 0
Interferers Not Tracked due to the limiting: 0
Wired Clients Not Tracked due to the limiting: 0
Total Elements(Wireless Clients, Rogue APs, Rogue Clients, Interferers, Wired Clients) Not Tracked due to the limiting:
0

-------------------------
Context Aware Sub Services
-------------------------

Subservice Name: Aeroscout Tag Engine
Admin Status: Disabled
Operation Status: Down

Subservice Name: Cisco Tag Engine
Admin Status: Enabled
Operation Status: Up

 

Thanks,

Sridhar

  • Security and Network Management
Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Pls mark this thread as

Pls mark this thread as answered if the provided info is the answer to your query.

Rasika.

 

3 REPLIES
VIP Purple

Hi Sridhar,Only MSE version 7

Hi Sridhar,

Only MSE version 7.4.x onward you can access MSE via GUI directly. Previous versions, you have to integrate it with Prime/WCS & then only you can see MSE detail from WCS/Prime GUI page.

 

HTH

Rasika

**** Pls rate all useful responses ****

 

New Member

Thx Rasika.

Thx Rasika.

VIP Purple

Pls mark this thread as

Pls mark this thread as answered if the provided info is the answer to your query.

Rasika.

 

617
Views
0
Helpful
3
Replies