Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multi-MAC Filtering on Autonomus AP

Good day all,

I have a case where 5 Autonomous APs (1262 and 1130) need to use MAC access lists in a white-list kinda settup.

Basically, it should be as straight forward as:

access-list 700 permit xxxx.xxxx.xxxx

access-list 700 deny all

The problem: I have to filter 117 MAC addresses and I have to repeat this on all five of them.

To make things worse, this is in another city so I'm doing all of this using team viewer.

Is there a way for the AP to import a .xls or .txt file with some special format as an access list?

2 REPLIES
New Member

Multi-MAC Filtering on Autonomus AP

Sorry I forgot to mention that this will be used for association so I will also add:

dot11 association mac-list 700

To the interface

Re: Multi-MAC Filtering on Autonomus AP

no, the AP doesn't take xml or csv as an import.

But you can cut and past the list into each one.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
121
Views
0
Helpful
2
Replies
CreatePlease to create content